Product Queries

Godox have been listening to users’ feedback on the original TT685 and have made various upgrades to the preceding model. The most notable of the upgrades is the broader bounce angle afforded by the TT685II. Providing a tilt angle from -7° to 120°, users...

Some error codes can be resolved by either restarting your device i.e. switching it off and then back on again, or by switching the device off and allowing it to cool for a few minutes we usually recommend 10-15 minutes depending on how long it has been...

Some error codes can be resolved by either restarting your device i.e. switching it off and then back on again, or by switching the device off and allowing it to cool for a few minutes we usually recommend 10-15 minutes depending on how long it has been...

Some error codes can be resolved by either restarting your device i.e. switching it off and then back on again, or by switching the device off and allowing it to cool for a few minutes we usually recommend 10-15 minutes depending on how long it has...

All of the Godox Transmitters are fully compatible with the AD200 Pro. These include the X1T, X2T and the XPRO. Other models in the godox series may be compatible but only if they have a 2.4Ghz frequency.

The Godox AD200 Pro is not bowens fit however it can be used with bowens fit softboxes. You would need either a speedlite to bowens fit adapter or the updated S2 adapter. Simply place the AD200 Pro into the adapter, lock it in place and attach your bowens...

The AD200 Pro is compatible with almost all cameras that have the correct hot shoe. You can also sync the AD200 Pro to your camera via sync cord if you camera will allow this.

The Godox AD300 Pro is fully compatible with all the main line godox transmitters such as the X1T, X2T and XPRO. Older models may be compatible as long as they work off a 2.4Ghz frequency.

Yes you can shoot in high speed sync up to 1/8000 with the AD200 Pro and also it also fully accepts TTL mode.

Yes the AD600 Pro is fully compatible with all cameras that have a specific transmitter designed for that camera model. Other models for example mamyia etc might be able to be synced via a sync cord however with older model cameras this is not guaranteed...

The AD300 Pro is compatible with most of the cameras on the market that have the relevant hot shoe mount. Cameras can also be synced to flashes via a sync cable however your camera will need to have the relevant sync port.

Yes the AD600 Pro fully supports formware updates. These can be found on the official godox website when they are released.

The battery will give you approximately 500 flashes on a full charge. We always recommend that if you are planning on not using your AD200 pros for extended periods of time you should take the batteries out of the flash unit.

Yes the Godox AD300 Pro allows both high speed sync up to a shutter speed of 1/8000th and also TTL.

Unfortunately Godox has its own internal built 2.4Ghz receiver which works directly with Godox only transmitters XPRO, X1T, X2T. You can put the AD200 Pro in slave mode which basically allows the AD200 Pro to flash after been exposed to another flash...

The AD200 Pro is popular with a large range of photographers. People that shoot outdoors or at different locations tend to go for the AD200 Pro as it?s incredibly portable, lightweight and easy to use. Wedding and events are also other types that photographers...

The Godox AD300 Pro is a portable flash light. It does come with a 10W modelling lamp which is great for preparing where your light will go.

Yes the AD400 Pro fully supports firmware updates.

these flashes are not compatible together however there are several work arounds you can do in order to use your equipment together. If you are using a Godox 2.4ghz transmitter, you can purchase a godox X1R-C receiver that attaches to the canon speedlite...

Visico work on their own internal triggering system so cannot work with godox transmitters.