Lencarta Wavesync Commander RX 443HMz

Please note: This receiver will not work with the new Wavesync 2.4, the X1T or the XPro. For these triggers please get the 2.4 GHz receiver.

This is the Receiver Unit only designed exclusively for our SuperFast, Atom, SmartFlash 2, ElitePro 2, Safari 2 and future flash systems

Individual flash heads can be controlled either individually or in groups from the Commander, which fits onto the camera hotshoe. The Commander can also adjust the power in 1/10th stop increments, turn the modelling lamp on or off, turn the beep on or off and test fire the flash.

Although our SuperFast flash heads are fitted with a slave sensor and so can normally operate as slaves, a receiver needs to be plugged into each flash head to benefit from remote control of each individual flash head. Both Controllers and receivers are available separately.

Please do not buy this Receiver unit unless you also have a Commander, it cannot be used without it.

*The Atom flash heads do not have modelling lamps and adjust in 1/3rd stop increments. The Safari 2 also adjusts in 1/3rd stop increments.