We have a showroom at our warehouse in West Yorkshire where you can see and try out our equipment before you buy. You're more than welcome to bring your camera along too. It would be helpful if you could ring to make an appointment, but an appointment isn't essential. Also, we have a number of distributors in different areas.Was this answer helpful?
Yes you can. All Lencarta lighting equipment have built in voltage stabilisers, and will automatically adjust to accept mains power of between 180-240 volts. For European customers on the continent, we supply power leads with euro-spec plugs, so there is no need for adapters. Just plug in and use!Was this answer helpful?
This is the Commander Unit only designed exclusively for our SuperFast, Safari 2, Atom, SmartFlash 2, ElitePro 2, Safari 2 and future flash systems
Individual flash heads can be controlled either individually or in groups from the Commander, which fits onto the camera hotshoe. The Commander can also adjust the power in 1/10th stop increments, turn the modelling lamp on or off, turn the beep on or off and test fire the flash.
Although our flash heads are fitted with a slave sensor and so can normally operate as slaves, a receiver needs to be plugged into each flash head to benefit from remote control of each individual flash head. Both Commanders and receivers are available separately and you can also buy the set (one Commander and one Receiver)
Please do not buy this Commander unit unless you also have a Receiver, it cannot be used without it.
*The Atom flash heads do not have modelling lamps, and adjust in 1/3rd stop increments. The Safari 2 also adjusts in 1/3rd stop increments.
You can download the instruction manual by clicking here.
|Parts & Spares|