We have a showroom at our warehouse in West Yorkshire where you can see and try out our equipment before you buy. You're more than welcome to bring your camera along too. It would be helpful if you could ring to make an appointment, but an appointment isn't essential. Also, we have a number of distributors in different areas.Was this answer helpful?
Yes you can. All Lencarta lighting equipment have built in voltage stabilisers, and will automatically adjust to accept mains power of between 180-240 volts. For European customers on the continent, we supply power leads with euro-spec plugs, so there is no need for adapters. Just plug in and use!Was this answer helpful?
Softbox honeycombs work in much the same way as honeycombs made for reflectors - they control the spread of light and force it to travel in almost straight lines, so you will need one if you use the softbox when it is pointing towards the camera lens but will not need it if it is pointing away from the camera lens, although even when pointing away from the camera, honeycombs can still be useful because the restrict the spread of the light.Was this answer helpful?
Large Roomset Softbox SOF069
This is a specialist softbox designed for photographing roomsets, for example furniture and lifestyle. However, it has many other uses too, including use as a white background ideal for photographing a single person (or a close couple), full length.
The front measures a massive 200cm x 130cm, which is the size needed for producing soft lighting in a large area.
The clever triangular design not only minimises the space needed, it also allows one or more of these softboxes to be placed into corners, and it also maximises the efficiency of the light distribution within the softbox.
Assembly is simple, it all fixes together similar to a frame tent, although you may not wish to take it apart after every use, making this softbox more suitable for large professional studios.
Once assembled, it can be moved around easily on the three included ball race castors.
The clever design directs light from two flash heads (not included) facing the rear, where it bounces around off of the sides, top and bottom of the highly efficient silver reflective material before reaching the thick, high density diffuser at the front.
The flashes are used barebulb, without reflectors or any other modifiers. and fit on to these spiggots and the flash head cables then pass through the space provided at the rear bottom of the unit.
You can see that the diffuser fits to the outside of the softbox using velcro-type material, which holds it in taut. Because of the design, the light is distributed at a fairly wide angle.
The photo shows the triangular shape, when viewed from the rear, and the photo below shows it with the flash heads fitted, and firing. The shot has been underexposed to show how remarkably even the light distribution is. The two dark-ish areas are of course the flash heads, which inevitably block the light to a limited degree, but this makes no visible difference at normal working distances.
Front: 200cm x 130cm
Tags: New Products