This is a 'goalpost' type system, made entirely from steel and ideal for supporting fabric or paper backgrounds up to 3 metres wide.
It assembles in seconds and can be adjusted to any height from 92cm to 2.55 metres. The width can be reduced by removing sections of the top rail (there are 4 sections, each 80cm wide). and it takes only seconds to change the width to 150cm, 231cm or 300cm.
The sections lock together by means of a spring loaded ball, and each section locks together rigidly with the help of a fluted male.female joint.
The top bar has a diameter of 28mm (which fits into the hem of any fabric background and which will also accept paper rolls).
The tripod support stands each have four sections. The top bar is secured with a wingnut at each end, and the tripods also have a standard 16mm reversible spigot, fitted with both a 1/4" and a 3/8" screw thread, which means that they can also be used as lighting stands when not required for the background. Another useful feature is that the spigots can be repositioned at 900 if required.
A partitioned, roll-up carrying bag is included, for easy transport and storage.
All of these features, and the excellent build quality, combine to make our background support system the best value and most versatile of its type.